WIZ750SR-105

Product Description

The WIZ750SR-105 is a compact sized serial to Ethernet module using the W7500 Ethernet MCU (SoC based on ARM Cortex-M0 architecture) with an external PHY (IC+). WIZ750SR-105 is a protocol converter that transmits data sent by serial equipment as TCP/IP data and converts the TCP/IP data received through the network back into serial data to the serial equipment. It complies with industrial temperature standard. It is compatible with the WIZ105SR module and, In addition, contains a 4-pin GPIO expansion port that can be controlled freely by the user as analog inputs or digital in/outputs.

The WIZ750SR-105 is compatible with the AT command set from WIZ107SR/WIZ750SR as the firmware and the configuration tool is the same for the board family. 

Features

• Hardware compatible with WIZ105SR Module
• Serial to Ethernet Module based on W7500 MCU (TTL level)
• external PHY included
• 10/100Mbps Ethernet & up to 230kbps serial speed (TTL level)
• Status pins: PHY link status / TCP connection status
• Two serial ports (Data UART, Debug UART)
• 2.00mm Pin-header module
• Four user configurable pins
• Built in 10/100Mbps Ethernet ESD Protection IC
• Built in Supervisor IC for improvements of Reset function stability
• Configuration is possible via serial AT commands or via Configuration tool
   

Related Links

WIZnet Documentation

WIZ750SR-105 product page on wiznet.io