W6100-Q

€2.86 €2.40
Delivery Time
5 - 7 d
3 in 1 chip for the Internet connectivity Hardwired TCP/IP + MAC + PHY Both SPI and parallel bus Interface 48QFN

Product Description


The W6100 is a Hardwired TCP/IP embedded Ethernet Controller that enables easier Internet Connection for embedded Systems using SPI (Serial Peripheral Interface) and Parallel Bus that incorporates IPv6 and is pincompatible to W5100S

W6100 suits users in need of stable Internet Connectivity Best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC, and PHY. The implemented Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE which has been proven through various Applications over many years. W6100 uses a 16 Kbytes Internal Buffer as its Data Communication Memory.

By using W6100, users can implement the Ethernet Application they need by using a simple socket Program instead of handling a complex Ethernet Controller. It is possible to use 8 independent hardware sockets simultaneously. 

W6100 users can implement High-Speed Network Communication. In order to reduce the power consumption of the system, W6100 provides a Power Down mode and can be enabled by Wake On Lan.

Information for users of the W6100: The new W6100 and W5100S is not fully pin-to-pin compatible with the W5100, but the software compatibility is kept, hence the software for the W5100 can be used with the W6100/W5100S without any modification.

 

Features

  • Supports hardwired TCP/IP protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
  • Supports IPv4/IPv6 dual stack
  • Supports 8 independent SOCKETs simultaneously with 32KB memory
  • Supports SOCKET-less commands: ARP, ICMPv6 (ARP, DAD, NA, RS) command for IPv6 auto-configuration & network monitoring (PING, PING6)
  • Supports Ethernet PHY power down mode & system clock switching for power save
  • Supports wake on LAN over UDP
  • Supports serial & parallel HOST interface: High speed SPI (MODE 0/3), system BUS with 2 address signal & 8bit data
  • Internal 32Kbytes memory for TX/ RX Buffers
  • 10BaseT/ 10BaseTe / 100BaseTX Ethernet PHY integrated
  • Supports auto negotiation (full/half duplex, 10 and 100-based)
  • Supports auto-MDIX only on auto-negotiation mode
  • Does not support IP fragmentation & jumbo packet
  • 3V operation with 5V I/O signal tolerance
  • Network indicator LEDs (full/half duplex, link, 10/100 speed, active)
  • 48 Pin LQFP & QFN lead-free package (7x7mm, 0.5mm pitch)
  • PIN-2-PIN compatible with W5100S
     

Related Links

WIZnet Documentation
W6100-Q product page on wiznet.io

More Information
Manufacturer WIZnet
Dimension 7 mm x 7 mm, 0.5 mm pitch
Ethernet I/F PHY
Operating Temperature -40 °C to +85 °C
Operating Voltage 3.3 V
Functions 3-in-1, TCP/IP + MAC + PHY
Network sockets count 8
internal DPRAM buffer memory 32 kB
Package QFN
pin count chip 48
MCU I/F 8 bit (indirect)
pin pitch 0.50 mm
Ethernet Speed 10/100
Protocol IPv4, IPv6
Auto Negotiation Yes
Wake on Lan Yes
Power Down Mode Yes
MCU core ARM Cortex M0
Core speed 96 MHz
Write Your Own Review
You're reviewing:W6100-Q