W5500 Ethernet Shield

Availability: In stock

Excl. Tax: €22.00 Incl. Tax: €26.18
  • Buy 5 for €21.00 (€24.99 incl. tax) each and save 5%
  • Buy 10 for €20.00 (€23.80 incl. tax) each and save 10%
  • Buy 100 for €19.00 (€22.61 incl. tax) each and save 14%
OR

Quick Overview

Arduino and ARM MBED compatible shield using WIZnet W5500

W5500 Ethernet Shield overview

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Product Description

The W5500 Ethernet shield has been designed using the WIZnet W5500 chip. Both 3.3V & 5V operating voltages are supported directly. This Ethernet Shield is compatible with Arduino and ARM mbed platforms.

Features

  • Suppport 3.3V / 5V
  • High Speed Ethernet controller W5500 chip
  • SPI interface
  • Internal 32 KByte TX/RX buffer
  • 10/100 MBit Ethernet PHY embedded
  • supports Auto Negotiation (full/half dupley, 10/100-based)
  • hardwired TCP/IP protocols: TCP, UDP, ICMP, IGMP, ARP. IPv4, PPPoE
  • configurable GPIO pins
  • supports I2C, UART
  • SD-card slot for storage

 

Related Links

W5500 Ethernet shield official documentation in the WIZnet Wiki

Additional Information

SKU w5500-shield
Functions 3-in-1, TCP/IP+MAC+PHY
Related Chip/Module W5500
MCU I/F SPI
parallel memory bus No
SPI (max. speed) 85 MHz
Network sockets count 8
MAC address inside No
internal DPRAM buffer memory 32 kB
Auto Negotiation Yes
Ethernet I/F MDI (PHY)
Ethernet connector RJ45
PoE possible No
Ethernet Speed 10/100
PHY chip internal
auto MDIX No
Wake on Lan Yes
Power Down Mode Yes
Dimension 69 x 54 mm
Package stand alone PCB
pin count No
pin pitch 2.54 mm
Operating Voltage 3.3V / 5V
typ. Power Consumption TBA
Operating Temperature TBA

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.