My Cart 0 items: €0.00

W5500 Ethernet Shield overview

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • W5500 Ethernet Shield overview
  • Box
  • W5500 Ethernet Shield GPIO select
  • W5500 Ethernet Shield pin functions
  • W5500 Ethernet Shield function with buffer module
  • W5500 Ethernet Shield function without buffer module
  • W5500 Ethernet Shield dimension

W5500 Ethernet Shield

Excl. Tax: €22.00 Incl. Tax: €26.18
  • Buy 5 for €21.00 (€24.99 incl. tax) each and save 5%
  • Buy 10 for €20.00 (€23.80 incl. tax) each and save 10%
  • Buy 100 for €19.00 (€22.61 incl. tax) each and save 14%

Quick Overview

Arduino and ARM MBED compatible shield using WIZnet W5500


Product Description

The W5500 Ethernet shield has been designed using the WIZnet W5500 chip. Both 3.3V & 5V operating voltages are supported directly. This Ethernet Shield is compatible with Arduino and ARM mbed platforms.


  • Suppport 3.3V / 5V
  • High Speed Ethernet controller W5500 chip
  • SPI interface
  • Internal 32 KByte TX/RX buffer
  • 10/100 MBit Ethernet PHY embedded
  • supports Auto Negotiation (full/half dupley, 10/100-based)
  • hardwired TCP/IP protocols: TCP, UDP, ICMP, IGMP, ARP. IPv4, PPPoE
  • configurable GPIO pins
  • supports I2C, UART
  • SD-card slot for storage


Related Links

W5500 Ethernet shield official documentation in the WIZnet Wiki

Additional Information

Dimension 69 x 54 mm
Ethernet I/F MDI (PHY)
Operating Temperature TBA
Operating Voltage No
Functions No
Auto Negotiation Yes
Network sockets count 8
internal DPRAM buffer memory 32 kB
Package No
pin count No
auto MDIX No
Wake on Lan Yes
Power Down Mode Yes
typ. Power Consumption TBA
SPI (max. speed) 85 MHz
PHY chip internal
Related Chip/Module No
Ethernet connector No
pin pitch No
MAC address inside No
PoE possible No
Ethernet Speed No
parallel memory bus No
Manufacturer No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.